Free ADS and Accusonic Downloads
Please click on the links below to download the appropriate software, firmware, or utility. If you have any questions or need assistance, please contact ADS Client Services at firstname.lastname@example.org, or by calling 877-237-9585 (toll free for U.S. customers); 256-430-6234 (outside the U.S.).
Qstart is a simple, user-friendly software program that allows field crews to quickly set up and activate ADS flow monitors as well as collect and review data from these monitors.
Click the following link to download: Qstart (version 1.9). For step-by-step instructions to install Qstart, download the Qstart Installation Guide. For step-by-step instructions on how to use Qstart, download the Qstart Quick Reference Guide. If upgrading to a newer version of Qstart, please uninstall the older version before installing the new.
For step-by-step instructions on how to configure and activate the ADS ECHO using Qstart, please download the ECHO-Qstart Quick Reference Guide.
Current versions of the firmware for ADS products are listed below. Click on the link next to your ADS product(s) to download the corresponding firmware.
- ADS ECHO Level Monitor and RainAlert III Rainfall Monitor Firmware - Download Firmware (Version v808r000)
- TRITON+ (Model 8000) - Download Firmware (Version TritonPlus_v619r001)
- FlowShark Triton (Model 8000) and IETG FlowHawk Monitors Using the 3G External Modem - Download Firmware (Version 4.81r001)
- FlowShark Triton (Model 8000) and IETG FlowHawk Monitors Using the 2G External Modem - Download Firmware (version 4.74r14)
- EMUX for FlowShark Triton (Model 8000) - Download Firmware (Version 901r8)
- FlowAlert and RainAlert II - Download Firmware (Version DSP610r6)
- FlowShark (Model 5000)
FlowShark AG, BG, CG - Download Firmware (Version DSP203r23; COMM 160r30)
FlowShark IS - Download Firmware (Version DSP 203r23)
FlowShark AL - Download Firmware (Version DSP 203r19)
USB Driver (setup executable file) - Required for ADS USB Communication Cable (P/N 8000-0337).
Download USB Driver (For step-by-step instructions to install the driver, download the Driver Installation Guide)
Bluetooth Driver - Supports on-site direct wireless communications with the ADS ECHO. The download file is a zipped/compressed file named CP210x_Windows_Drivers.zip. All files within the .zip folder must be extracted and saved on your computer to run the application. Once the files are extracted, run the CP210xVCPInstaller_x64.exe file for 64-bit systems and CP210xVCPInstaller_x86.exe file for 32-bit systems.
Download Bluetooth Driver
Accuflow is Windows-based software that provides a user-friendly interface with Accusonic’s Model 7510 and 8510 Series Flowmeters. The application allows the operator to configure and examine flowmeter parameters (site specific), control the flowmeter measurement cycle, graph real time or historical flow data, and conduct diagnostic tests for troubleshooting purposes.
Click here to download the 32-bit or 64-bit system Accuflow6_2_8.zip file to your computer.
Installation Instructions: Double-click on the executable file to initiate the software install. The install wizard will guide you through the software installation. If upgrading to a newer version of AccuFlow, please uninstall the older version before launching the executable file.
Model 798 Flow Configurator is a Windows-based software utility that provides a user-friendly interface with the Model 798 and 797 Clamp-on Transit-Time Flowmeters. The software allows the operator to program and upload pipe specific data into the flowmeter and establish all of the output and measurement parameters through an easy to use menu. In addition, the operator can access simple diagnostic information to help verify the operation of the flowmeter.
Click here to download the Model 798.zip file to your computer.
Installation Instructions: Double-click on the file, and then extract the FlowConfig_V202.exe file to any directory on your hard drive. The file name can then be changed to 798 Software Configurator. Once you open this file, an .INI file will be created. You will need to open the .INI file in Notepad and then add the following two lines to the bottom:
NOTE: This application can run on any Windows operating system at any speed.