High Accuracy Flow Metering for Large Pipes and Channels

The Accusonic Model 8510+ provides accurate, reliable flow measurement for applications ranging from full pipes to partially full or surcharged pipes, open channels, streams, and rivers. The 8510+ has the ability to measure up to 10 paths in the same measurement section, assuring superior performance even in the presence of severely distorted flow conditions. Additionally, the 8510+ can measure flow in up to 5 separate pipes and/or channels simultaneously.

The Model 8510+ can be fully integrated into a complete flowmeter network system via the Accusonic Model 7700 Master Control Unit. In addition, the complete offering of Accusonic transducers is available for use with the Model 8510+, including designs for hazardous area installations, exposed pipes of all materials, buried or encased pipes, and pipes and channels that cannot be dewatered.

Flexibility

Measurable pipe and channel sizes can range from 8 inches (200 mm) to 600 feet (180 m)

Accuracy

Utilizing multiple chordal path transit-time technology, the 8510+ provides accurate flow measurement (± 0.5% for full pipes and ± 1.0% for partially full pipes and open channels)

Economy

The 8510+ is configurable to measure up to 5 separate pipes and/or channels simultaneously, thus significantly reducing the cost per measurement
600
Feet Maximum Measurable Pipe/Channel Size
5
Pipes and/or Channels Measured Simultaneously
4
GB of Internal Memory Storage
Measurement Options
Open Channel; Full Pipe; Partially Full to Surcharged Pipe
Number of Acoustic Paths
1-10
Number of Pipes or Channels
1-5
Accuracy
± 0.5% of Rate Full Pipe Applications (typical); ± 1.0% of Rate Partially Full Pipe/Open Channel Applications (typical)
Repeatability
± 0.2% of Rate Full Pipe Applications (typical); ± 0.3% of Rate Partially Full Pipe/Open Channel Applications (typical)
Outputs
(4) or (8) Isolated Analog 4 – 20 mA with 750 ohm max impedance load; Optional (6) Relay Outputs 7.0 A @ 110 VAC or 5.0 A @ 24 VDC; (2) RS-232 Serial Communication Ports; Modbus (RTU Mode) via RS-232, RS-485 or TCP/IP
Inputs
(4) or (8) Analog 4-20 mA, 100 ohm impedance; 24 VDC loop power is available
Power Requirement
90 - 250 VAC, 47-65 HZ or 100 - 300 VDC (12, 24, 48 VDC is optional); 26 to 35 watts power consumption (200 watts with optional heater)

High Accuracy Flow Metering for Large Pipes and Channels

The Accusonic Model 8510+ provides accurate, reliable flow measurement for applications ranging from full pipes to partially full or surcharged pipes, open channels, streams, and rivers. The 8510+ has the ability to measure up to 10 paths in the same measurement section, assuring superior performance even in the presence of severely distorted flow conditions. Additionally, the 8510+ can measure flow in up to 5 separate pipes and/or channels simultaneously.

The Model 8510+ can be fully integrated into a complete flowmeter network system via the Accusonic Model 7700 Master Control Unit. In addition, the complete offering of Accusonic transducers is available for use with the Model 8510+, including designs for hazardous area installations, exposed pipes of all materials, buried or encased pipes, and pipes and channels that cannot be dewatered.

Related Products

View Other ADS Flow Monitors